User`s guide

15
Chap. 2
Printing
Installation of the driver
Before using your Dualys printer, you must install its driver.
Remember: the driver and Dualys printer operate under Windows 2000, NT 4.0 and Xp.
The CD provided with the printer includes a utility which automates the installation of the
printer driver. This utility installs the driver the right driver for your
configuration.
• Insert the DRIVERS & DOCUMENTATION CD-Rom reader.
• Wait a few seconds until the CD welcome program tells you to choose your language.
• Click on the flag of your required language.
• Another menu appears telling you to install the printer driver. Follow the instructions below to set up your
Evolis printer.
You use Windows, your printer is connected to the mains, the Parallel cable or USB is not connected.
■ Click on Driver installation.
■ An installation menu appears suggesting you preserve the installations previously performed.
By default the cases are hidden and the installation programme will delete all existing set-ups.
■ Click on Install to start the procedure.
■ When told to do so, choose the type of interface you wish to use to connect your Evolis printer:
USB or Parallel.
The installation programme asks you to turn on the printer. Carefully follow the instructions
below:
■ Connect the USB or Parallel cable between the PC and the printer.
■ The system will automatically detect your peripheral and start the Add Printer
assistant
after a few seconds.
■ Select Next, the Finish.
■ Click OK in the Information window.
■ The installation is complete, click on End.
■ Click on Quit to close the installation programme
Your Evolis printer is ready to personalise your cards once more.
In the event of any incident in the installation, consult the chapter Windows Users - Installation Manual
The installation of a driver under Windows NT, 2000 or Xp may require the authorization of the
system administrator. In the event of any problem, contact this administrator to advise you on the
installation method and associated rights of access.