User`s guide

5
Chap.1
Setting out
Choice of a location
The Dualys printer must be set up on a level surface, in a dust free environment.
It is essential to be able to access the printer from all sides for installation and use.
WARNING !
The printer weighs 13,5 kg (29.76lbs) without the consumables installed.
It is therefore wise to be helped by another person when lifting and moving it.
Unpacking the printer
To unpack the printer, proceed as follows:
1. Remove the upper protective foams.
2. With another person, lift the printer out of its cardboard and place it in the selected
location.
3. Remove the plastic cover and any adhesive from the outside of the printer.
NOTE !
It is best to keep all the packing materials in case the printer has to be moved or
returned for any reason.
The following elements are provided with your Dualys printer:
■
Power supply and supply cable
■
Printer interface cables (parallel Centronics and USB)
■
Quick Operating Guide
■
Dualys CD (Drivers & Documents)
■
eMedia Card Designer CD
■
eMedia Information Guide
■
Cleaning kit
If any of these elements are missing from your set, please contact your Evolis reseller.