User`s guide

Changing a print head

The print head of a printer is changed easily and effectively without any need for tools or any special

adjustment.

WARNING !

Before changing a print head, make sure that the printer has been turned off (position 0).

Stage 1 - Removal of the faulty print head

1. Open the printer cover and

locate the print head.

1. Insert the two

cables in their

housing

2. Insert the head vertically in

the two guides

3. Turn the print head to clip it

in the metal piece.

2. With one hand, push the

metal piece located at the back

under the cover and, with the

other hand, turn the two forks

to release the print head from

the head arm.

3. Disconnect the two

cables located behind

the print head

4. Close the printer

cover. The print head

is now installed.

Stage 2 – Installation of the new print head