User`s guide

Consult the following conditions of the control panel to determine the activity of the Dualys printer or

the nature of the problem:

Status of the LED’s Interpretation Solution or explanation

PRINTER READY The printer is ready to receive data

PROCESSING The printer is receiving data from one

or several of its interfaces

END OF RIBBON

■

there is no ribbon in the printer

■

the ribbon has finished

■

the ribbon has been uncorrectly installed in

the printer

■

the ribbon has cut

Check the status of the ribbon in the printer.

If you have a printing job in course, this starts

again with a new card.

NO CARD

■

there is no card in the feeder

■

the card thickness is not properly set

■

the cards are bulging

■

the cards are stuck together

Press the push button for one second.

The printing will start again after the feeder

has been checked out.

PRINTER CLEANING ALERT

■

The printer needs cleaning

(after 1000 insertions) See chapter 3 “Cleaning”

PRINTER CLEANING ALERT

■

The printer needs cleaning

(after 1200 insertions) See chapter 3 “Cleaning”