User`s guide

Reject card box
The Dualys printer is fitted with a reject box situated underneath the card feeder.
The reject box is designed to receive:
- all faulty cards
- all used cleaning cards
- printed test cards
A card present in the flip over module or in the printing station is ejected into the reject box in the
following cases:
■ Detection of a problem in transporting the card
■ Detection of the problem with the rising and lowering of the print head
■ Detection of a problem in the flip over module
■ Torn or cut ribbon
■ Error of magnetic encoding (data writing or reading)
■ Error of personalisation of a smart card (data writing or reading)
■ Error of personalisation of a contactless card (data writing or reading)
NOTE !
The reject box can contain up to 20 cards (0.76 mm - 30 mil). The excess cards are
ejected out of the printer.
Other stages of installation
You have now completed the installation (material) of your Dualys printer. For the moment, we
strongly advise you to continue to read this manual and we will inform you that there are still two extra
stages to be followed to make your Dualys printer perfectly operational:
■ Installation of printer driver
■ Printer cleaning
11
Locate the reject card box and
remove the faulty or/and used
cleaning cards.