User`s guide

08
IInniittiiaall aapppprrooaacchh
A Output hopper Collects the printed and/or encoded cards.
B Cover lever Enables the printer cover to be opened and closed.
C 100-card Feeder Receives the cards for printing.
D Control Panel Shows the printer activity.
E Manual card feeder Enables the cards to be inserted one by one.
F Carrying handle Enables the printer to be carried.
G DB-9 connector(s) (option) Enables data to be received and sent "from" and "to" the computer
and coupler to be connected for chip cards personalization.
H Power supply connector Enables the printer to be connected to its power supply.
I USB computer connector (std) Enables data to be received and sent "from" and "to" the computer.
J RJ45 Ethernet connector (option) Enables data to be received and sent from and to computer(s)
through an Ethernet network.
K Flip-over station Rotates the card 180°.
L Contactless (RFID) card encoding Enables contactless chip cards to be personalized.
antenna (option)
M Cleaning roller Removes all dust before the cards are printed
N Card thickness gauge Enables the thickness of the card to be adjusted from
0.25 mm (10mil) to 1 mm (40mil)
O Thermal print head Enables the cards to be printed in 300 dpi.
P Identification label This label indicates the model and the serial number of the printer.
Q Magnetic encoding head (option) Enables cards with magnetic tracks 1, 2 and 3 to be encoded.
R Smart card contact station (option) Enable cards with chip to be personalized.