User`s guide

1. Note the code indicated

on the white ticket affixed

to the print head. You

will be asked for this

code in Step 3.

2. Pick up the new

print head and

turn it toward

you, with the

white connector

visible.

3. Connect the cable into its

seat, making sure it is in

the correct direction. Do

not force the mechanism,

as this part is relatively

sensitive.

4. Turn the head so

that the notice is

visible: the

connector is no

longer visible.

To complete the exchange of the print head, proceed as follows:

Before changing a print head, make sure to disconnect the printer from its power supply.

Step 1 - Removing the defective print head

Step 2 - Installing the new print head

7. The head is put back in place.

1. Open the cover and locate the

print head.

2. Press down on the metal piece at

the bottom as indicated

in order to release the lugs of the

holding forks, then

pull the lugs out from their seat .

3. Turn the head

carefully and

disconnect the

connector linked

to the cable

without forcing

the mechanism.