User`s guide

2. Remove the cards

that are in the

feeder.

3. Insert the cleaning

card in the feeder

as indicated.

5. Put the feeder

back into the

printer than

press on the top

part of the

feeder until the

‘click’ is heard.

To service the printer card feed system, obtain a pre-saturated cleaning card specially designed for

the printer.

A cleaning kit including samples of these cards is shipped with your Evolis printer.

Repeated running of the card in the printer cleans the card feed rollers, the cleaning rollers, the

print head and the magnetic head (if your device has one).

Proceed as follows:

4. Using the

lever, adjust

the thickness

of the card to

the MAX

position.

1. Remove the

card feeder

as indicated.

6. Open the

cover and

remove the

ribbon from

the printer

as shown.

7. Close the

cover of

the printer.