User`s guide

SSeerrvviicciinngg aanndd

MMaaiinntteennaannccee

In this chapter, we suggest that you identify the ordinary service

operations for your Evolis printer that will enable you to ensure a

very high quality of personalization of your plastic cards.

Keep your Warranty in effect !

The factory warranty is subject to strict compliance with ordinary maintenance instruc-

tions, and specifically to compliance with the equipment cleaning cycle intervals.

Failure to comply with the procedures described in this chapter entails cancellation of

the warranty on your printer and its print head.

Evolis will not be liable if the printer is used under non-approved maintenance conditions.

OOrrddiinnaarryy mmaaiinntteennaannccee

Evolis provides you with the following maintenance items, available under the following reference item

A5011 - UltraClean cleaning kit:

■ Five cleaning cards pre-saturated with 99% isopropyl alcohol.

■ Five 99% isopropyl-based cotton swabs.

■ A dispenser box of 40 pre-saturated cleaning wipes.

CClleeaann tthhee ccaarrdd ffeeeedd mmoodduullee

Cleaning cycle: every 1000 cards inserted

Maximum interval between two cleaning cycles: 1200 inserted cards

Maintenance accessory: pre-saturated cleaning cards

When a cleaning of the card feed module is necessary (every 1000 cards

printed), the cleaning light from the control panel comes on as follows:

This message is an alert that indicates to the operator that it is necessary to perform the cleaning cycle.

If the printer is not cleaned after the LED illuminates, the LED will remain illuminated and will start

flashing when 200 additional cards have been printed.

In that event, immediately stop the work in progress and proceed with the cleaning.

If there is no maintenance action on your part, the message will remain posted and the

factory warranty will be implicitly invalidated for failure to comply with the contractual

maintenance requirements.