User`s guide

IInnssttaalllliinngg tthhee mmaannuuaall ccaarrdd ffeeeeddeerr aanndd llooaaddiinngg tthhee ccaarrddss

The Pebble and Dualys printers may be optionally fitted with a manual card feeder for inserting cards

one by one. Manual card feeder option should be set through the driver Properties in the Graphic tab.

Then select Manual feed option in Source Tray menu and in Output Tray menu choose the option

according to the required operation mode for the card exit.

The manual card feeder is installed as follows:

OOtthheerr ssttaaggeess ttoo tthhee iinnssttaallllaattiioonn

You have now completed the installation (material) of your Evolis printer. For the moment, we would

urge you to carry on reading this manual and we would inform you that there are still two extra

stages to be followed to make your Evolis printer fully operational:

• Installation of the driver

• Printer cleaning

4. Insert the

card as

shown.

3. Place the manual

supply tray in the

printer as

indicated. Then

press on the top

of the feeder

until it clicks.

1. Remove the

feeder from

the printer as

shown.

2. Using the

lever, adjust

the thickness

of the card to

MAX position.