User`s guide

IInnssttaallll tthhee ccaarrddss

TTyyppeess ooff ccaarrddss

The Pebble and Dualys printers support PVC cards varying in thickness between 0.25 mm (10 mil)

and 1 mm (40 mil). For optimum quality, these cards must comply with ISO Standard 7810.

They are of a number of types:

■ Blank cards

■ Magnetic stripe cards

■ Contact smart cards

■ Contactless smart cards

■ Smart cards and magnetic stripe

Correct positioning of the magnetic stripe cards and of the contact smart cards in the feeder must

be scrupulously observed. Failure to comply with the direction of insertion would prevent the enco-

ding option from functioning.

IInnssttaallllaattiioonn iinn tthhee ffeeeeddeerr

The cards are installed in the feeder as follows:

Only use the type of cards appearing in the Technical Specifications in this manual

Do not touch the printable surface of the cards: the printing quality depends on this.

Do not use cards that are damaged, bent or that have an embossed texture.

Always store the blank cards in a clean and dust-free location.

1. Remove the

feeder as

indicated.

2. Insert the

cards into the

feeder as

indicated,

printable face

down.

3. Adjust the

gauge setting

in terms of the

thickness of

your cards.

4. Put the feeder back into

place in the printer until it

“Clicks” in place.