User`s guide

12
IInnssttaallll tthhee rriibbbboonnss
T
he Evolis Pebble and Dualys printers use three types of ribbons:
■ Color ribbon also called multi-panel ribbons
■ Monochrome ribbons available in different colors: black, red, green, blue, white, gold, silver
■ S
pecial ribbons such as scratch-off and hologram
The Evolis original ribbons are specially designed to guarantee optimum operation of your
equipment without any risk of damage. The use of ribbons from any other source than Evolis
could seriously damage the print head, consequently entailing the immediate interruption of
the factory warranty.
For optimum printing quality, Evolis recommends cleaning all the equipment each time a ribbon is
changed. It is up to the user to make this determination, provided, however, that he makes sure to
comply with the mandatory cleaning cycles in order to keep the equipment in perfect operating condi-
tions (consult the chapter on Ordinary Maintenance).
The validity of the factory guarantee is conditional upon compliance with these cleaning
cycles (cf. Limited Evolis Warranty document).
MMoonnoocchhrroommee oorr ccoolloorr rriibbbboonn
To install a monochrome or color ribbon in the print module, proceed as follows:
The ribbon is automatically positioned
after the cover is closed
.
Installation of the print ribbons must be accompanied by
adequate defining of the parameters of the print driver.
Please refer to the chapters on Properties of the Driver for
additional details.
1. Open the cover of
the printer by
pressing the
opening lever then
turn it in vertical
position.
2. Install the new
ribbon in the
position indicated in
the diagram:
•Toothed wheel
toward the rear
of the printer.
• Part including the
new ribbon located
on the right side
(card feeder).
3. Lower the cover
and lock it.