User manual

3
Read before installation
and usage!
!
Keep this manual for later checks.
If you install EVOline Port Push add
this manual to your product.
 Denitionofsymbols
Danger of electric shock
Safety advice/Warning
Technical data:
Rated voltage: 230 V
Rated current: 16 A
Max. connected load: 3.600 W
Degree of protection: I
Protection class: IP 40
Output of USB Charger (optional): 1.000 mA
Standby power of USB Charger (optional): 0,5 W
Technical data of multimedia modules (optional): on
request
Approvals: TÜV approval
Applications:
The EVOline Port Push can be mounted in desks from 10
to 50 mm thickness. The cut-out must have a minimum
distance of 100 mm from the desk edges. In ush position
only frame and cover of the Port Push are visible. The
Push-to-Open function releases the cover from its ush
position by pressing it down, allowing to pull it out and all
installed modules become accessible. The Port Push can
be retracted into its ush position, even with plugged in
connectors (depending on the overall size of the connec-
tors). The patented rocking cover enables a kink protected
cable outlet.
Optional: Charging function through a USB socket type
A without PC connection. For standard devices with
USB-connection.
Because of the wide range of available connectors,
the retractability of the Port Push cannot be granted
for all combinations of connectors. Test carefully with
every connector before pushing down the prole.
EVOline Port Push may not be covered.
Do not place any hot subjects, e.g. pans on top of the
Port Push!
Must be installed by skilled person with
electrical knowledge and experience!*)
Inappropriate installation can lead to:
- Danger to life of the user
- Risk of severe damage to property.
There is a threat of individual liability if damages to
persons or property occur. Electrical installer
needed!*)
*
For a proper installation the following skills are
mandatory:
- Knowledge of the “5 safety rules”: insulate, secure
against resetting, measure, grounding, cover any
live devices in the surrounding
- Choice of proper tools, measure devices and perso-
nal protective equipment
- Analysis measurement results
- Choice of installation material
- IP protection classes
- Switch off conditions
- Fitting of installation material
- Type of supply network (TN system, IT system,
TT system…) and the resulting switching conditions
Any modication of the live parts of the Port Push
(socket outlets, USB-Charger) is strictly forbidden
and causes loss of liability or warranty. It may cause
danger of electric shock or even re! If you detect a
malfunction, please contact your dealer.
The multimedia part is seperated, allowing that mo-
dules can be changed by a skilled person according
to the demand of the customer.
Instructions see below.
Functional description
Pay attention before use:
Take care of the way of installation. Port Push may
only be daisy-chained if integrated into xed installa-
tion. Socket outlets installed in the prole may not be
used for the connection to further socket outlets!
Sockets with switches are only on zero-potential if
supply cable is properly disconnected.