Specifications
20
1. Follow all instructions in Programmed Options – “Timer”
Mode menu above.
2. Set the TIME ON and TIME OFF values to 00:01 and 00:00
respectively.
By setting the timer to allow the heater to run 24 hours a day you can “set and forget” the
operation of the heater. The heater will turn on the water pump, run until it reaches the desired
water temperature and then switch itself and the water pump off. Once the water tempera-
ture drops by 1 degree inside the internal plumbing of the unit the heater will restart the water
pump and heat pump and heat again to the desired temperature. This process will continue
indenitely until manually overridden.