Specifications
17
Programmed Options – “Timer” Mode
This mode gives you precise control over your heater start and stop times 7 days a week.
To gain the most efciency out of your heater, use the timer to run the heater in the hottest
part of the day, say 9am – 6pm. This may mean your pool isn’t at the perfect temperature at
3am in the morning for a late night dip, or an early morning swim. This is the most efcient
running mode. Setting the timer will require interaction with your heater, and may mean heater
operating hours will need to be extended during the cooler months of the year. Evoheat can
provide an accurate computer model of your pool's requirements in terms of heater run time.
Please contact Evoheat for further advice.
1. Ensure the heater is in STANDBY mode.
2. Set the mode to HEAT from MAIN MENU>MODE
SELECT>COOL/HEAT.
3. Set the desired swim water temperature from
PARAMETER>HEAT TEMP
If the pool requires cooling please select cool mode.