Specifications

16
4. Turn the heater ON
5. The heater will turn on and off according to times
set on your (A) chlorinator or timing device (B)
the temperature set on the controller once reached
At initial startup the water pump may need to be in operation for several days to allow
the heat pump to heat the pool to the desired temperature. The operation time of the
water pump may also need to be adjusted from winter to summer to ensure adequate
time to heat the pool.
In the PARAMETER menu please DO NOT modify any of the following values unless
specically advised by Evoheat – DEF CYC, DEF IN, DEF OUT, DEF TIME, SYSTEM,
SAVE, TYPE.
4.2 HEATER CONTROLS A DEDICATED WATER
PUMP – ADVANCED OPERATION
This option allows the user to control Programmed Options mode.
The water pump is dedicated to heater circulation only.
This method requires the water pump to be hard-wired into the heater via the Pump Power
inlet. With the water pump wired in this manner the heater is able to operate in the
following modes.