Specifications

38 39
Avoid damaging the charger jack, be careful when you connect or disconnect the charger
cable or removing and replacing the controller in the docking station.
2
1
4.3. Turning the controller on and off
Press and hold the power button until the controller screen turns on or off
Pressing the power button quickly will make the screen wake or sleep
Power Button
Tips: 1. Whether the heater is on or off, closing the controller will not affect the heater
operation as original settings will be saved
2. If you dont touch the screen for a minute, the controller will go to sleep. Tapping
the screen will wake it up.
4.4. The function of the reset key
If anomalies appear on the controller such as: icon displacement, controller crashes or the
screen goes black, press the reset button to recover the system.
The Reset Button
5. The controller usage
5.1 Unlock controller
Drag to the right edge of the screen to unlock controller.
5.2 Turning the unit on and off
If the unit is on, tap to turn the system off-the screen will show
If the unit is off, tap to turn the system on-the screen will show
Time
Malfunction icon
Displays when the heater has a problem
Timer icon
Displays when the timer has been set
Signal strength
Target temperature
Battery
Water inlet
temperature
Heating mode
Highlighted icon shows
the current mode
Cooling mode
Automatic mode