User manual

Assembly and Maintenance
- 22 - ERC-1005
5.3.2 Removing the Motherboard
1、 Loosen the two captive screws on both sides of the motherboard panel;
2、 Horizontally open the assisting handles outward to remove the motherboard;
3、 Remove the expansion card in the same way.
5.4 Removing the Driver
1、 The hard disk module has been installed on the motherboard, before removing
the hard disk module, please draw the motherboard out of the chassis;
2、 Remove the four screws fixing the hard disk bracket as shown in the figure;
3、 Gently remove the hard disk module away from the SATA connector on
motherboard to take the module out.