User manual

Device Connection
ERC-1005 - 7 -
3.3 Connecting the Device to Power
Steps to connect the device to power:
Please make sure the positive end
and the negative end of the power
cord are connected correctly when
connecting the power cord ①.
Please refer to the pin definitions of
the power connector for detailed
information.
Connect the power cord with the
connector ② and press down the
switch ① with the silkscreen of
“-”. The green power LED indicator
on the rear panel of the PC is lit and
the PC is powered on.
Danger
Please disconnect the power and data cables during thunder storm.
Note:
To completely isolate the device from the power supply, please disconnect the
power connector.