User manual

Chapter 2 Installation
- 12 - EC7-1817LNAR
Pin Signal Name Pin Signal Name
1 LVDSE_D0+ 2 LVDSE_D0-
3 GND 4 GND
5 LVDSE_D1+ 6 LVDSE_D1-
7 GND 8 GND
9 LVDSE_D2+ 10 LVDSE_D2-
11 GND 12 GND
13 LVDSE_CLK+ 14 LVDSE_CLK-
15 GND 16 GND
17 LVDSE_D3+ 18 LVDSE_D3-
LVDS2
19 VDD 20 VDD
Note: LVDSOx indicates to dual scan the odd line of PANEL while LVDSEx
indicates to dual scan the even line of PANEL.
The LVDS socket adopted by the board is DF20G-20DP-1V while the
corresponding terminal type is DF20A-20DF-1C.
3、 The board provides one Type A HDMI connector; the pin definitions are as
follows:
HDMI1
Pin Signal Name Pin Signal Name
1 TMDS Data2+ 2 TMDS Data2 Shield
3 TMDS Data2- 4 TMDS Data1+
5 TMDS Data1 Shield 6 TMDS Data1-
7 TMDS Data0+ 8 TMDS Data0 Shield
9 TMDS Data0- 10 TMDS Clock+
11 TMDS Clock Shield 12 TMDS Clock-
13 CEC 14 Reserved (NC on device)
15 SCL 16 SDA
17 DDC/CEC Ground 18 +5V
19 Hot Plug Detect