User manual

Chapter 2 Installation
EC7-1817LNAR - 11 -
Display Connector
1、 The board provides one standard DB15 VGA connector; the pin definitions are
as follows:
Pin Signal Name Pin Signal Name
1 Red 2 Green
3 Blue 4 NC
5 GND 6 GND
7 GND 8 GND
9 NC 10 GND
11 NC 12 DDCDATA
13 HSYNC 14 VSYNC
J1(VGA1)
15 DDCCLK
2、 The board provides one dual-channel 24bitLVDS connector (LVDS1 and
LVDS2; Pitch: 1.0mm). When single channel 18-bit/24-bit LVDS screens are
adopted, the LVDS data cable shall be connected with LVDS1. The pin
definitions for dual-channel 24-bit LVDS are as follows:
Pin Signal Name Pin Signal Name
1 LVDSO_D0+ 2 LVDSO_D0-
3 GND 4 GND
5 LVDSO_D1+ 6 LVDSO_D1-
7 GND 8 GND
9 LVDSO_D2+ 10 LVDSO_D2-
11 GND 12 GND
13 LVDSO_CLK+ 14 LVDSO_CLK-
15 GND 16 GND
17 LVDSO_D3+ 18 LVDSO_D3-
LVDS1
19 VDD 20 VDD