User manual

BIOS Setup
EC3-1816CLD2NA(B) - 23 -
* Power Off
S5 status, i.e. the computer needs to be manually powered on after AC
power is connected.
* Power On
S0 status, i.e. the computer is automatically powered on after AC power is
connected.
* Last State
Return to S0 or S5, depending on the status when the computer is
disconnected from AC power. For example, if the computer is at power-on
status (S0 status), the computer is automatically powered on after AC power
is connected; if the computer is at power-off status (S5 status), the computer
will not be automatically powered on after AC power is connected (remain
S5 status).
 IGFX – Boot Type
Set the primary display device booted by IGD.
 DP-to-LVDS Panel Type
Used to select resolution of onboard LVDS
 LVDS BackLight Value
Set LVDS backlight brightness adjustment
 Fixed Graphics Memory Size
Set the graphics memory size.
 Azalia Controller
Used to enable or disable audio card controller
 UHCI #X (ports X and X)
Used to set controller mode to enable or disable.
 USB 2.0(EHCI) Support