User manual

Chapter 3 BIOS Setup

EC3-1813CLD2NA(B) - 37 -

 Exit

BIOS SETUP UTILITY

Exit Options

Save Changes and Exit

Discard Changes and Exit

Discard Changes

Load Optimal Defaults

Load Failsafe Defaults

Exit system setup after

saving the changes.

←→ Select Screen

↑↓ Select Item

Enter Go to Sub Screen

F1 General Help

F10 Save and Exit

ESC Exit

 Save Changes and Exit

When you have finished all the changes and want to cover the original

parameters, you may implement this operation and save the new parameters into

CMOS storage. To implement this operation, you may choose this option and

press < Enter >; press < Enter > again to exit.

 Discard Changes and Exit

If you do not want to save the change into CMOS storage, please choose this

option and press < Enter >; press < Enter > again to exit.

 Discard Changes

If error occurs in your change and the changes need to be neglected, please

choose this option and press < Enter > in order to enter corresponding options

again and reset it.

 Load Optimal Defaults

This menu is used to load default value in system configuration. These default

values are optimized and could give play to the high capability of all hardware.

 Load Failsafe Defaults

The function of this option is to initialize the setup of each option to realize the

most fundamental and secure system functional value. To implement this

function, choose this option and press < Enter >; messages to be confirmed will

be shown on the screen, press < Enter > to implement this function.