User manual

Chapter 3 BIOS Setup
EC3-1813CLD2NA(B) - 33 -
 Clock Generator Configuration
BIOS SETUP UTILITY
Configure Clock Generator
Spread Spectrum Control [Enabled]
Auto PCI Clock [Enabled]
←→ Select Screen
↑↓ Select Item
+ - Change Field
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 (c)Copyright 1985-2006, American Megatrends, Inc.
 Spread Spectrum Control
This option is used to control the spread spectrum function of the clock signal.
 Auto PCI Clock
This option is used to detect the devices on PCI slot automatically. If there are
no devices in the slot, please disable the clock signal on that slot.
 Chipset
BIOS SETUP UTILITY
Advanced Chipset Settings
WARNING: Setting wrong values in below sections may
cause system to malfunction.
N
orthBridge Configuration
DRAM Frequency [Auto]
Configure DRAM Timing by SPD [Enabled]
Initiate Graphic Adapter [PCI/IGD]
Boot Display Device [CRT+LVDS]
Flat Panel Type [800X600/S/18/G104S]
UserDefine Panel Type [Disabled]
SouthBridge Configuration
Onboard Audio Controller [Enabled]
←→ Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 (c)Copyright 1985-2006, American Megatrends, Inc.