User manual

Chapter 3 BIOS Setup

- 32 - EC3-1813CLD2NA(B)

 USB Mass Storage Device Configuration

This option is used configure the USB mass storage device, including reset

delay setting and enumeration type.

 Power Management Configuration

BIOS SETUP UTILITY

Power Management Configuration

ACPI APIC Support [Enabled]

Restore on AC Power Loss [Last state]

Resume on RTC Alarm [Disabled]

←→ Select Screen

↑↓ Select Item

+ - Change Field

F1 General Help

F10 Save and Exit

ESC Exit

V02.61

(

)

ht 1985-2006, American Me

atrends, Inc.

 ACPI APIC Support

This option is used to enable or disable APIC under ACPI OS.

 Restore on AC Power Loss

This option could set the system status when the computer is re-electrified after

powered off under AC. “Power Off” is to make the system at power off status;

“Power On” is to power on the system automatically; “Last State” is to recover

the status before powering off.

 Resume on RTC Alarm

This option is used to enable or disable the system clock. When the specified

time is expired, it will wake the system from power saving mode, even from

power off mode. This function shall be supported by ATX power.