User manual

Chapter 2 Installation
EC3-1813CLD2NA(B) - 21 -
Configuration instructions for VGA + LVDS dual display output, take XP system
as an example:
Display the Second Display via Clone Mode
1. Install the latest Chipset and VGA drivers into the operating system and connect
with the two displays; right click the “Graphics Property” on the desktop to
enable “Intel Graphics Media Accelerator Driver” control software and the
following interface will appear. Click “multi-screen display”, a set of options
will appear on the right; choose “Operating Mode” and then “Dual display in
clone mode” in the drop down list:
2. Set the models of the primary display and the secondary display in “Primary
Display” and “Secondary” successively.
3. After that, click “Apply” and then the two displays will adjust the desktop. The
primary display will show the following information: