User manual

Chapter 3 BIOS Setup
- 28 - EC0-1815V2NAR
 SATA Configuration
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Controller(s) [Enabled]
SATA Mode Selection [IDE]
Serial ATA Port 1 Empty
Serial ATA Port 2 Empty
Serial ATA Port 3 Empty
Serial ATA Port 4 Empty
Serial ATA Port 5 Empty
Serial ATA Port 6 Empty
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save
ESC: Exit
Version 2.14.1219. Copyright (C) 2011,American Megatrends, Inc.
 SATA Controller(s)
Switch for the SATA Controller(s).
 SATA Mode Selection
SATA controller type selection, corresponding with three options: IDE, RAID
and AHCI.
Note: when choosing AHCI or RAID Mode to implement system installation,
the relevant drivers of the Floppy device and specified chipset are required.
 Serial ATA Port 1 ~ 6
Serial ATA Port1 ~ 6 dynamically detect whether there are SATA devices on
motherboard. If devices are connected with the corresponding ports, then it will
display the SATA device type. Otherwise, it will display “Empty”.