User manual

Chapter 2 Installation
EC0-1815V2NAR - 17 -
 Assemble the bracket of the cooling fin with the fixing holes on the rear of the
CPU card. Note: the T-shaped gap shall correspond with the bracket of the CPU
socket;
Warning: please use the bracket of the metal cooling fin with care, so as to
prevent the short circuit of the pins within the red circle on the back of the CPU!
 Connect the front side of cooling fin with the bracket and fix them; ensure well
contact between CPU surface and cooling fin;
 Fix the cooling fin with two screws on the cross (do not tighten it) and then the
other two screws; then tighten the four screws;
 Lastly, connect the fan power cable with the fan socket on the CPU card.
Note! It is recommended to use cooling fan authenticated by Intel; before installing
the fan, smear the heat sink compound on the surface between CPU and the fan
cooling fin to improve the heat dissipation performance.