User manual

Chapter 2 Installation
EC0-1815V2NAR - 13 -
TPM Connector
The board provides one 2x10 TPM pin header (PIN4 is NA, Pitch: 2.54mm).
Pin Signal Name Pin Signal Name
1 CLOCK 2 GND
3 LPC_FRAME- 4 NA
5 PLT_RST- 6 VCC5
7 AD3 8 AD2
9 VCC3.3 10 AD1
11 AD0 12 GND
13 SMB_CLK 14 SMB_DATA
15 VCC3SB 16 SERIRQ
17 GND 18 CLKRUN
TPM
19 SUS_SATA- 20 DRQ-
LAN Port
The board provides two 10/100/1000Mbps LAN ports, J1 (LAN1) and J2 (LAN2).
LAN1 supports Wake-on-LAN, and AMT8.0 functions. ACTLED and LILED are the
green and dual color LED indicators on both sides of the Ethernet port, which
respectively indicates the activity status and the speed of LAN. Please refer to the
status description for each LED:
LAN1/LAN2
LILED
(Dual-Color: O/G)
LAN Speed
Indicator
ACTLED
(Green)
LAN Activity
Status Indicator
Green 1000Mbps
Blink Data being transmitted Orange 100Mbps
Off No data being transmitted Off 10Mbps