User manual

Chapter 2 Installation
- 10 - EC0-1815V2NAR
Loudspeaker Output Connector
Pin Signal Name
1 SPEAKER
2 NC
3 GND
FP3 (Pitch: 2.54mm)
4 +5V
7pin SATA Connector
Pin Signal Name
1 GND
2 TX+
3 TX-
4 GND
5 RX-
6 RX+
SATA1 ~ SATA6
7 GND
KB/MS Connector
Pin Signal Name Pin Signal Name
1 KB_DATA 7 MS_DATA
2 NC 8 NC
3 GND 9 GND
4 +5V 10 +5V
5 KB_CLK 11 MS_CLK
KM1
6 NC 12 NC
USB Port
The board provides four USB 3.0 ports, brought out by rear panel; the other two USB
2.0 ports are brought out by 2x5Pin headers (Pitch: 2.54mm).
1. USB3.0 Port: