installation and_manual

INSTALLATION INSTRUCTIONS
A f f i n i t y 3 0 G
Evo, Inc., 20560 SW 115th Ave., Tualatin, OR 97062 USA
Phone [phone] | Fax [phone] | www.evoamerica.com | [e-mail]
28
CHECK INSTALLATION
DRIP PAN PROPERLY INSTALLED 16
Ensure that the drip pan half-rolled top bead overhangs
the cutout dimension by .25” and the black o-ring
is creating a seal against the counter top.
DRIP PAN GASKET SECURED 17
Black drip pan gasket should fi t properly and create a
seal where the drip pan meets the chassis skirt.
COOK SURFACE INSTALLED PROPERLY 18-21
Cook surface support rails should be sitting on
chassis top with rear bullet secure in rear slot and
two front fasteners tightened so cook surface does
not move.
GAS CONNECTION HOOKED UP PROPERLY 22-27
Check for gas leaks.
Check for proper operation.
PAGE
Check to ensure the following items are complete: