User Manual

▪ front axle nuts

▪ headset

▪ stem clamp

▪ bottom bracket and crank

screws

▪ rear wheel axles nuts

▪ seat post clamp

▪ brake caliper screws

▪ spoke tension

Spoke tension has to be checked on a regular interval. Failing

can cause spoke breakage and will void the warranty

Repairing a puncture

With the motor in the rear wheel it is slightly more complex to replace a tire or

tube. In case of a puncture we first recommended to check if the puncture can

be repaired using a patch, without removing the wheel from the frame.

1. Lay bike on the derailleur side (protected, or use a repair stand)

2. Pull tire off rim (one side is enough)

3. Pull tube out of the tire

4. Identify puncture in tube and check tire for any sharp objects to be

removed

5. If tube is still repairable apply patch

6. Refit and pump up tire

Removal of rear wheel

• Change to gear 7 (makes it easier to get chain from cassette)

• Unclip motor cable from chain stay

• Unplug motor cable

• Remove axle nuts (take derailleur protector off)

• Pull wheel out of drop-outs

Assemble in the same way – make sure to plug in motor cable correctly (arrows

must match). Never force it as it can damage the pins!