User Manual

Operation
• Turn the display on by pushing
the (M) button
• Select the desired assistance
level with the (+) and (–) keys.
The initial assistance level is 1
(Torque ECO mode).
• Levels 4 to 8 are Pedal-Assist
levels (4=low...8=high)
• Use the throttle as desired to add additional power to the selected
assistance
• When finished riding keep the (M) button pressed for 2 sec to turn the
electrics off
Display functions
Battery level: The display shows the battery level with 5 bars. Each level is
about 20% of power, when the battery reaches about 10% no bars will be
shown and the battery icon starts to flash. At this stage the controller or
battery might turn off when a higher load is applied, i.e. riding uphill. Please
recharge as soon as possible.
Power: the power bars above the battery indicator shows the rider how much
power the motor uses while riding. More bars means the battery will get faster
depleted.
Turning off: The display turns off automatically after 5 min. To manually turn
it off keep the (M) button pushed for 2 seconds.
Trip information: the display shows the current speed and trip details. By
default the last travelled distance will be shown. By pushing the (M) button the
following information can be displayed:
Max speed for last trip ODO meter
Travel time last trip Auto cycle (in auto cycle these
information will be shown in a cycle
Last travelled distance automatically).
To reset the trip information: press and hold (+) and (-) buttons for 2 sec,
then push (-) once to clear trip distance (all other values will be cleared as
well). ODO meter can not be reset! To exit press (+) and (-) again. Make sure
that you don't change any other settings.
12