Operator's Manual

1. 20/70 Buna O-Ring 40920

2. 21/70 Buna O-Ring 40921

3. 22/70 Buna O-Ring 40922

4. 3/32 long arm 42033

5. 3/16 short arm 42028

6. 5/64 short arm 42038

7. 1/8 short arm 42026

8. Regulator Reg Seat 57486

9. Evil Pus 62221

10. 4 Ball Detents 10160

11. Barrel Centering O-ring 19/70 U 10265

12. Evil Barrel Condom 61228

™

Screwing the Trigger Adjustment Screw (part #84) in further will make the spring push on the trigger more,

and therefore make the trigger pull more stiff. Loosening the screw will make the trigger pull lighter. If you

remove the plate, spring and screw the marker may bounce too much for tournament play. Make sure the

cone of the spring is installed with the larger end down.

Parts Kit

Trigger Adjustment

Remove Trigger Frame from the marker. You will have to disconnect the Solenoid to

completely remove the Trigger Frame.

Trigger Frame pictured from directly above.

Lighter Trigger Pull

Stiffer Trigger Pull