Owner's Manual

1. Remove tank from Omen

2. Degas marker

3. Remove all Paintballs from marker

4. Turn to page 12 in Omen Owners Manual 1.1

5. Using a 5/32 Allen key remove part # 7 (Pivot Cover Screw/ Sear Plate Screw)

6. Rotate part # 4 (Pivot Cover) up and out of the way

7. Using a 1/16 Allen key remove part # 3 (Cover Plate Screw)

8. Remove part # 2 (Cover Plate)

9. Using a small flat head screw driver remove part # 6 (Cam Pin Threaded)

Note: Once unscrewed you will have to push the Cam Pin out from the bottom using a

.050 Allen Key.

10. Remove part # 84 (Cam Arm Assembly)

11. Install new part # 84 (Cam Arm Assembly)

12. Using a small flat head screw driver reinstall part #6 (Cam Pin Threaded)

13. Reinstall part #2 (Cover Plate)

14. Using a 1/16 Allen Key reinstall part # 3 (Cover Plate Screw)

15. Rotate part # 4 (Pivot Cover) back down

16. Using a 5/32 Allen Key reinstall # 7 (Pivot Cover Screw/Sear Plate Screw)

17. Kill Fools…..

INSTALLATION OF 1.5 CAM ARM ASSEMBLY

58524