Introduction Congratulations on purchasing your Eviant Portable Digital TV. On June 12, 2009 conversion to the digital television broadcasting standard occurred all throughout the United States and Puerto Rico. Your portable digital television is designed to pick up the new digital signals (ATSC) as well as the older analog signals (NTSC). Use your portable digital TV at work or take it on vacation and relax with your favorite TV programs anywhere.
Important Safety Information (continued) Warning: To reduce the risk of fire, electric shock or damage, do not expose this product to rain or moisture. Do not use your TV in high explosive areas as the unit may generate sparks. Do not handle the TV with wet hands while it is being charged. It may cause an electric shock or seriously damage your TV. Maintain well ventilated conditions around the product. Do not put product flat on a bed or block the ventilation openings in any way.
FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with limits for Class B digital device, pursuant to part 15 of the FCC Rules.
Table of Contents Introduction Important Safety Information ...................................... 1 FCC Compliance ......................................................... 3 Accessories.................................................................. 3 Getting Started Controls & Connections .............................................. 5 Antenna ....................................................................... 6 Using AC Power Adapter ............................................
Getting Started Controls and Connections 1. 4.3’’ LCD Screen TOP 1. Build-in antenna 2. Menu LEFT AND RIGHT SIDES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. External antenna Jack Earphone Jack ON/OFF LED indicator DC 5V Jack CH (Up) CH (Down) VOL (Right) VOL (Left) OK / AutoScan REAR 1. Stand 2.
Getting Started (continued) Antenna Your TV is supplied with a built-in telescoping antenna that will provide good reception in most situations. Be sure to keep the TV stationary when trying to receive a signal. Any movement of the TV can result in loss of the digital signal. Handle the antenna with extreme care to avoid bending it. Your Eviant T4 is also supplied with an external antenna that can be located a short distance away from the TV to improve reception.
Getting Started (continued) Quick Auto Scan Press OK / AutoScan button and hold for 3 seconds. Auto Scan Setup Wizard will display. Select the antenna type and then go to the next step, Quick Auto Scan will start. To exit during scanning, press Menu button and hold for 3 seconds. Display Options Press MENU to enter the setup menu. Use the menu to adjust the picture, audio, channel and other functions. Navigate the menus with VOL and VOL . Press MENU again to go back or exit.
Display Options (continued) Picture Mode Press the CH CH buttons to select Picture Mode. Press the VOL quality. VOL buttons to select Personal, Standard, Dynamic or Soft picture Contrast / Brightness / Sharpness / Tint / Color Press the CH CH buttons to select Contrast/Brightness/Sharpness/Tint/Color. Press the VOL VOL buttons to adjust the value. Press MENU button to return to the previous menu. Power level Display the power level of built in battery.
Display Options (continued) Time Menu Press the VOL VOL buttons to select. Press the CH button to enter into Time Menu. Press the CH CH buttons to select the desired sub-menu. Sleep Time Press the CH CH buttons to select the Sleep Mode. Press the VOL VOL buttons to set the auto shut-off timer. Note: The Timer has a tolerance. For example, if you set sleep time to 5min., the unit probably shut-off after 5min and 5 second. Time Zone Press the CH CH buttons to select the Time Zone.
Display Options (continued) Setup Menu Press the VOL VOL buttons to select Press the CH button to enter into setup window. Press the CH CH buttons to select the desired sub-menu. Menu Language Press the CH CH buttons to select Menu Language and press the VOL VOL buttons to select desired language. Menu Transparency Press the CH CH buttons to select Transparency and press the VOL change transparency value of menu. VOL buttons to On Screen Display Timeout Press the CH CH buttons to OSD Timeout.
Display Options (continued) In the Closed Caption Submenu: CC Mode Press the CH CH buttons to select CC Mode. Press the VOL VOL buttons to select the desired option. Basic Selection Press the CH CH buttons to select Basic Selection. Press the VOL VOL buttons to select CC1, CC2, CC3, CC4, Text1, Text2, Text3, and Text4. Advanced Selection Press the CH CH buttons to select Advanced Selection and press the VOL VOL buttons to select Service1, Service2, Service3, Service4, Service5 or Service6.
Channel Setup Channel Menu Press MENU to pull up the on screen setup menus Press the VOL VOL buttons to select. Channel Press the CH button to move down into channel menu. Press the CH CH buttons to select the desired sub-menu. Air/Cable Press the CH CH buttons to select Air/Cable. Press the VOL Air or Cable. VOL buttons to select options: Note: Your TV is designed to work with an antenna or the signal from a cable system.
Channel Setup (continued) Show/Hide Use this function to turn off channels that you don’t want to see as you go through the channels. Press the CH CH buttons to select Show/Hide. Press the VOL button to enter Show/Hide Menu. Press the CH CH buttons to select channel. Press OK button to confirm which channel to show or hide. “√”means this channel is selected to show. Channel No. Use this feature to select which channel to customize using the Channel Label function below.
Troubleshooting Before contacting customer service, review the steps below to solve simple problems. If you still suspect something wrong with this unit, immediately turn the power off, disconnect the power adapter from the unit, and contact Eviant Customer Service. Never try to repair the unit yourself. Problem No Signal No Display No Sound Possible Cause Possible Solution No broadcast signals in the area or signals too weak. Change location or try using external antenna.
Specifications TFT screen size..................................... 4.3 inches Resolution............................................. 480 x 272 AC Power Adapter................................ Input: 100-120V AC 50/60Hz 0.35A max. Output: 5V DC 2A Power Consumption ............................. ≤9W Dimensions (H, W, D) .......................... 78mm x120 mm x 18.5mm Weight................................................... ≈192g Design and specifications are subject to change without notice.
