Manual

2
CS-14GMTR-MOD | Camera-Source | www.camera-source.com | [e-mail]
PARKING GUIDELINES: Note that the camera has the parking guidelines enabled by default. To remove
the camera guidelines simply snip the looped white wire that is protruding from the shrink tube on
the camera wire near where the camera plugs into the chassis harness. Isolate each wire so they’re
not touching.
Note: You will want to remove the guidelines if you will be using the dynamic guidelines that have
been built into the display from the factory.
The blue wire is used to reverse the image, and is not used in this application. It should be left uncut.