User Guide EVGA Z97 Classified Specs and Initial Installation (Part 1) -1-
Table of Contents Before you Begin………………………………………………………………………3 Parts Not in the kit…………………………………………………………………….4 Intentions of the kit……………………………………………………………………4 Motherboard Specifications……………………………………………………………5 Unpacking and Parts Descriptions……………………………………………………..7 Equipment……………………………………………………………………………..7 Hardware Installation…………………………………………………………………..8 Component legend………..……………………………………………………………8 PCI-E Slot Breakdown………………………………………………………………....9 Rear I/O Panel legend………………………………………………………………..
Before You Begin… Welcome to a new class of high performance motherboards that boast 4th and 5th Generation Intel® Core™ Processor compatibility. The Z97 platform takes you to a new level of performance and efficiency. We have refined the GUI BIOS interface, reimagined power VRM that focuses on efficiency, added MPCIE support and loaded with features like 4-Way SLI, Creative Sound Core3D quad-core audio processor, Intel Gigabit LAN, native SATA 6G/USB 3.0 and more.
Parts NOT in the Kit This kit contains all the hardware necessary to install and connect your new EVGA Z97 Classified Motherboard.
Motherboard Motherboard Specifications Size: EATX form factor of 12 inches x 10.3 inches Microprocessor support: Intel Socket 1150 Processor Operating Systems: Supports Windows 8 / 7 Contains Intel Z97 chipset System Memory support: Supports Dual channel DDR3 up to 2666MHz+. Officially supports up to 32GB of DDR3 memory. USB 2.0 Ports: 6x from Intel Z97 PCH – 4x external, 2x internal Supports hot plug Supports wake-up from S1 and S3 mode Supports USB 2.
Onboard Audio: Creative Core3D Quad-Core Audio Processor (CA0132) Supports 6-channel (5.1) audio Supports Optical Output PCI-E 3.
Unpacking and Parts Descriptions Equipment The following accessories are included with the EVGA Z97 Classified Motherboard: The EVGA Z97 Classified Motherboard This PCI-E motherboard contains the Intel Z97 chipset. I/O Shield Installs in the system case to block radio frequency transmissions, protect internal components from dust, foreign objects, and aids in proper airflow within the chassis.
Intel Z97 Classified Motherboard The EVGA Z97 Classified Motherboard with the Intel Z97 and PCH Chipset. Figure 1 shows the motherboard and Figure 2 shows the back panel connectors FIGURE 1.
1. CPU Socket 1150 12. Debug LED / CPU Temp Monitor 23. Mini PCI-E/mSATA 2. Intel Z97 Southbridge 13. CMOS Battery 24. Front Panel Audio Connector 3. CPU Fan Header (1 amp PWM) 14. USB 3.0 Headers 25. EVGauge 4. DDR3 Memory DIMM Slots 1-4 15. USB 2.0 Headers 26. Back Panel Connectors (Figure 2) 5. 24-pin ATX power connector 16. CMOS Reset Button 27. 8 pin EPS Connector 6. Fan Headers (1 amp DC) 17. Power Button 28. Supplemental PCI-E 6pin Power 7. PCI-E Disable Dipswitches 18.
Figure 2. Chassis Rear Panel Connectors 1. USB 2.0 4. Intel i210 NIC 7. Optical Out 2. USB 3.0 5. Intel i217 NIC 8. Analog Audio Output Jacks 3. BIOS/CMOS Reset 6. Mini Display Port Analog Audio Port Breakdown 2/2.1 (Channel) 4.0/4.1 (Channel) 5.
Preparing the Motherboard Installing the CPU Be very careful when handling the CPU. Hold the processor only by the edges and do not touch the bottom of the processor. Note: Use extreme caution when working with the CPU, not to damage any pins in the CPU socket on the motherboard! Use the following procedure to install the CPU onto the motherboard: Remove the plastic protective socket cover by pulling it straight up. Be sure not to damage any of the pins inside the socket.
Align the notches on the CPU to the notches in the socket. Lower the processor straight down into the socket. Note: Make sure the CPU is fully seated and level in the socket. Lower the load plate so it is resting on the CPU. Carefully lock the lever back into place. Installing the CPU Cooling Device There are many different cooling devices that can be used with this motherboard. Follow the instructions that come with your cooling assembly.
Installing System Memory (DIMMs) Your Z97 Classified has (4) 240-pin slots for DDR3 memory. These slots support 2GB, 4GB and 8GB DDR3 DIMMs. There must be at least one memory slot populated to ensure normal operation. The Intel Z97 chipset supports dual channel memory; supports a maximum of 32GB of DDR3 and up to 2666MHz+ in dual channel configuration. It is required to populate slot 1 first. The board will not boot if slot 1 is not populated. Use the following procedure to install DIMMs.
Compliance Information FCC Compliance Information This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
