User manual

Using PCoIP Host Cards with VMware View
WHITE PAPER / 11
 Ifpromptedrestarttheoperatingsystem(OS)(otherwiseskipthisstep)Whenrestartedthehostdriver
softwareinstallationprocesscontinueswhentheOSbootsupClickInstalltocontinue
 ClickFinishtocompleteinstallation
Configuring the PCoIP Zero Client
To use the PCoIP zero client through VMware View, you must enable the client for management by
VMware View.
To configure the zero client:
 Logintotheclientadministrativewebinterfaceoron-screendisplay(OSD)(fromtheConnectwindow
clickOptions)
 FromtheConfigurationmenuchooseConnectionManagement
 EnsureEnableConnectionManagementisnotselected
Figure 5: Connection Management Window
 FromtheConfigurationmenuchooseVMwareView
 SelectEnableVMwareView
 FromtheConnectionServerIPAddressfieldentertheIPaddressFQDNofthephysicalserverorvirtual
machinehostingVMwareView
 EnabletheSecureSocketLayer(SSL)