User guide

PCoIP Technology User Guide
9
i.e. without the use of a management tool
(Management Console, connection broker, etc).
This example uses the following IP and MAC
addresses:
IP MAC
Host
192.168.20.29 00-1E-37-DB-09-93
Portal
192.168.0.34 00-16-41-FF-5C-C0
Note: For a manual peer-to-peer connection, the
Host and Portal IP and MAC addresses must be
known.
First configure the Portal:
1. In a browser, open the Portal’s Web
Administration Web Interface, for example:
https://192.168.0.34.
2. Log in to the Web Interface by entering the
admin password.
3. From the Configuration menu, select
Connection Management.
Figure 3-3: Connection Management
Webpage
4. Ensure that Enable Connection
Management is not selected.
5. On the Configuration menu, select Session
webpage from the Configuration menu.
Figure 3-4: Session Webpage (Portal)
6. In the Peer IP Address, enter the Host’s IP
address, e.g. 192.168.20.29.
7. In the Peer MAC Address, enter the Host’s
MAC address, e.g. 00-1E-37-DB-09-93.
8. Click the Apply button to accept changes.
Now configure the Host:
1. In a browser, open the Host’s Web
Administration Web Interface by typing its
address in the address box, for example,
https://192.168.20.29.
2. Log in to the Web Interface by entering the
admin password.
3. From the Configuration menu, select
Connection Management.
4. Ensure Enable Connection Management is
not selected.
5. On the Configuration menu, select Session.
The Session webpage appears.