Specifications

Using PCoIP® Zero Clients with PCoIP Host Cards
T E C H N I C A L N O T E S / 4
1 PCoIP Configuration Tools
Several of the recommendations in this guide, such as configuring PCoIP bandwidth utilization and image
quality, determining IP addresses, assigning connections, and updating PCoIP firmware, are accomplished via
the PCoIP Web interface, zero client onscreen display (OSD) and/or Management Console. These tools are
introduced below.
1.1 Web Interface
Every PCoIP host card and zero client provides a Web-based interface that allows you to view or modify
configuration settings, update firmware, set USB authorization, view event logs, and perform other common
management tasks. To access the Web interface, navigate to the PCoIP zero client or host card IP address
through a Web browser. Obtaining PCoIP device IP addresses is discussed in Section 4.2. Note that if PCoIP
management passwords have been configured, you will require the password to log in to the Web interface.
Figure 1: The PCoIP host card Web interface