Specifications

Using PCoIP® Zero Clients with PCoIP Host Cards
T E C H N I C A L N O T E S / 1 6
Figure 11: Client IP address on OSD Network tab
Figure 12: Host IP address on OSD Session tab (if client is statically paired to the host)
• If the host and client are on the same subnet containing a small number of PCoIP devices and host discovery
is enabled, click the client Connect button. The auto-discovery function will locate host cards. However, if
there are many PCoIP hosts on the subnet, only the first five devices located are displayed, and the five that
are displayed may change on subsequent connection attempts.
• To find the IP address of a host card, navigate to “pcoip-host-<MAC-ADDRESS>” in a Web browser where
<MAC-ADDRESS> is the MAC address of the host card with all hyphens and spaces removed (e.g., for host
card MAC address 00-1C-B3-BF-22-45 use “pcoip-host-001CB3BF2245”). This will open the host card Web
interface. The MAC address is printed on a sticker on the card itself and on the box of most host cards and
may also be under Options  Configuration  Session tab on the client OSD if the client and host are
statically paired.