User manual

PCoIP Management Console User Manual
Figure 4-22: Bandwidth Configuration Settings Dialog Box
4.4.5.1 OSD Logo in a profile
An OSD logo may be uploaded into a profile to be applied to all devices in a group.
Choose Profile OSD Logo->Set OSD Logo and have an image file prepared that is a
24bpp bitmap that does not exceed 256 pixels by 64 pixels. Use the Browse button to
locate your image file and the Upload button to import the file to the MC. Figure 4-23
shows the Add OSD Logo dialog.
Figure 4-23: Add OSD Logo property
4.4.5.2 Firmware in a profile
A firmware file can be assigned in a profile along with upgrade criteria that must be met
before the firmware is pushed to each device.
To associate firmware with a profile choose Profile Firmware->Set Firmware in the profile
properties. Choose the firmware version from the existing firmware versions in the select
box. The firmware file must have been previously imported into the MC (see section
4.6.1). Figure 4-24 shows the Link to Imported Firmware dialog.
Choose the firmware replacement criteria from these options:
• Different: Firmware will be overwritten on the device if its version is different from
the firmware version listed in the select box.
TER0812002 Issue 5 59