User manual

PC-over-IP Administrative

Interface User Manual

Figure 2-8: Session Configuration

2.3.5.1 Session Type

The Session Type allows the administrator to configure the Portal for a PCoIP session or

RDP session.

For information on the Portal RDP client, see Section 6 Appendix C: Portal RDP

Compatibility.

2.3.5.2 Identify Peer By

The Identify Peer By selector allows the administrator to choose whether the peer device

is identified by IP and MAC address or by Fully Qualified Domain Name (FQDN).

Table 2-2 shows the peer identity parameters available when either method is chosen. If

an invalid IP address or DNS name is entered, the OSD will prompt the administrator to

correct it.

Table 2-2: Peer Identity Methods

Peer Identity Method Data Fields Comment

Peer IP/MAC Peer IP Address PCoIP or Portal RDP client

Peer MAC Address PCoIP

Peer FQDN Peer FQDN Used with Portal RDP client only

2.3.5.3 Enable Auto-Reconnect

The Enable Auto-Reconnect option allows the Portal to automatically reconnect with the

last connected Host when a session is lost.