User manual

PC-over-IP Administrative
Interface User Manual
60
2.3.3.1 Enable Connection Management
If the Enable Connection Management option is enabled, the device can be configured
and controlled by an external connection manager.
2.3.3.2 Identify Connection Manager By
The Identify Connection Manager selector allows the administrator to choose whether the
connection manager is identified by IP address or by Fully Qualified Domain Name
(FQDN). If connection management is disabled, this field is not required and is not
editable.
Table 2-1 shows the configuration parameters available when either method is chosen. If
an invalid IP address or DNS name is entered, the OSD will prompt the administrator to
correct it.
Table 2-1: Connection Manager Method
Method Data Fields
IP address Connection Manager IP Address
FQDN Connection Manager DNS name
2.3.3.3 Enable Event Log Notification
The Event Log Notification field controls whether the PCoIP Host and Portal devices send
the contents of their event logs to the connection management server
2.3.3.4 Enable Diagnostic Log
The Enable Diagnostic Log field controls whether connection management specific
debug messages are written to the event log of the PCoIP Host and Portal devices.
2.3.4 Discovery Tab
The Discovery configuration tab allows the use of features that ease the discovery of
Portals in a PCoIP system.
Note: The Discovery parameters can also be configured using the Webpage
Administration Interface. See Section 1.6.4 Discovery.