User manual

PC-over-IP Administrative
Interface User Manual
47
• 1600x1200
• 1920x1200
This option is only available on a Portal; on the Host it is disabled and non-editable.
1.8.6.3 Start/Stop
The Start button starts the test pattern and the Stop button stops the test pattern.
This option is only available on a Portal; on the Host it is disabled and non-editable.
1.8.7 PCoIP Processor
The Reset PCoIP Processor Reset button allows the administrator to reset the device
processor.
Figure 1-34: PCoIP Processor Webpage
1.8.7.1 Current Time
The Current Time field displays the current time. This feature requires that the NTP be
enabled and configured as described in Section 1.6.12 Time.
1.8.7.2 Time Since Boot
The Time Since Boot field allows a user to view the uptime of the Portal PCoIP processor
since last boot.
Note: The Portal Uptime can also be viewed using the Portal OSD. See Section 2.4.3
PCoIP Processor.
1.8.7.3 Reset PCoIP Processor
The Reset PCoIP Processor button allows the administrator to reset the PCoIP Portal or
Host.
1.9 Info Menu
The Info menu contains links to pages that show information about the device. The
webpages in the Info menu are:
• Version