User manual

PC-over-IP Administrative
Interface User Manual
36
Figure 1-21: Password Configuration Webpage
1.6.13.1 Old Password
The Old Password field must match the current administrative password for the update to
take place.
1.6.13.2 New Password
The New Password field will be the new administrative password for both the web
interface and the local OSD GUI.
Note: The Host and Portal passwords are changed individually.
1.6.13.3 Confirm New Password
The Confirm New Password field must match the New Password field for the change to
take place.
1.6.14 Reset Parameters
The Reset webpage allows the administrator to reset all the configurable parameters
stored in flash.
Note: The Portal Reset Parameters can also be initiated using the Portal OSD. See
Section 2.3.10 Reset.
Figure 1-22: Reset Parameters Webpage
1.6.14.1 Reset Parameters
The Reset Parameters button resets all configuration and permissions to factory default
values. When this button is selected, the web interface will prompt the administrator for
confirmation to prevent accidental resets.