User manual

PC-over-IP Administrative
Interface User Manual
34
This option is only available on a Host; on the Portal it is disabled and non-editable.
Figure 1-19: Monitor Emulation Configuration Webpage
1.6.11.1 Enable Monitor Emulation
When Enable Monitor Emulation is disabled, the Host will only respond to Display Data
Channel (DDC) when in a PCoIP session. When Enable Monitor Emulation is enabled,
the Host will use emulated data for DDC queries regardless if in a PCoIP session of not.
Independent Enable Monitor Emulation fields are available for both monitor ports, DVI 1
and DVI 2.
1.6.12 Time
The Time webpage configures the Network Time Protocol (NTP) settings to allow the
event logs (see Section 1.8.1 Event Log) of the Portal and Host to be time-stamped
based on NTP time.
Figure 1-20: Time Configuration Webpage
1.6.12.1 Current Time
The Current time field displays the time based on the NTP.