Specifications

Before You Begin…
Parts NOT in the Kit
This kit contains all the hardware necessary to install and connect your new EVGA nForce
motherboard. However, it does not contain the following items that must be purchased
separately to make the motherboard functional.
 Intel microprocessor:
Intel Core 2 Extreme, Intel Core 2 Quad, Intel Core 2 Duo, Pentium EE, Pentium, and
Celeron Socket 775 CPU’s. (up to 1066Mhz FSB on 610i motherboards)
 Cooling fan and heat sink for the microprocessor
 System memory support:
Supports single channel DDR2 533/667/800, (800MHz not supported on 610i
Motherboards )
 Power Supply
The power supply requirement is dependent upon the components used in the system.
We recommend at least a 350 watt power supply for a basic configuration.
 *Graphics Card*
This motherboard comes with an onboard graphics adapter; it also has a PCI express x16
slot for graphics cards.
These instructions help you install each of the parts listed so you can have a functioning
motherboard. As you go through the installation instructions, we are assuming you have
purchased the necessary parts.
Motherboard Specifications
 Size
mATX form factor.
 Microprocessor support
Intel Core 2 Extreme, Intel Core 2 Quad, Intel Core 2 Duo, Pentium EE, Pentium, and
Celeron. (610i supports up to 1066MHz FSB CPU’s)
 Operating systems
Supports Windows XP and Windows Vista.
 Contains NVIDIA nForce MCP and integrated GeForce graphics
 System Memory
• Single-channel DDR2 800/667/533 (800MHz RAM not supported on 610i)
• Supports up to 4 GB DDR2 memory (2GB x 2)
 USB 2.0 Ports