User guide

nForce 790i Ultra SLI Motherboard
EVGA Corporation
68 January 11, 2008 | DU-03751-001_v01
Init Display First
This function on the PnP/PCI Configuration menu allows you to define if
the initial display is in the PCI slot or in the PCI Express slot. Options are
[PCI Slot] and [PCIEx].
Reset Configuration Data
This function on the PnP/PCI Configuration menu allows you to enable
or disable the resetting of Extended System Configuration Data (ESCD)
when you exit Setup. Set this to
[Enabled] if you have installed a new
add-on and the system reconfiguration has caused a serious conflict that
prevents the OS from booting. The default setting is
[Disabled].
Resources Controlled By
This function on the PnP/PCI Configuration menu allows you to define if
the BIOS can automatically configure all the boot and plug-and-play
compatible devices or if you can manually select IRQ, DMA, and memory
base address fields. Select
[Auto(ESCD)] if you want the BIOS to
automatically populate these fields. If you select
[Manual] so you can
assign the resources,
IRQ Resources is enabled for input.
Resources Controlled By [Manual)]
IR
Q
R
esou
r
ces
[
Pr
ess
En
te
r
]
Resources Controlled By [Auto(ESCD)]
x IRQ Resources Press Enter